|
Woven Wire Screens
|
|
Double Crimp
This mesh is crimped warp and weft, sprung together during the weaving process to provide a rigid mesh.
Use:
Most normal applications in mesh openings up to 25mm.
|
|
Corrugated Crimp
This mesh has two crimps in warp and weft directions, between the intersections.
Use:
This type of weave is used to achieve a rigid mesh when the opening is large relative to wire diameter.
|
|
Lock Crimp
This mesh is similar to corrugated crimp with an additional crimp either side of the main crimp to give a firmly locked mesh.
Use:
This crimp will retain accurate opening throughout the life of the screen.
|
|
Pressed Crimp Flat Top
This mesh has deep pressed crimps on alternative intersections providing a flat side to the mesh.
Use:
This mesh allows material to flow freely across the screen.
|
|
Fitting of Mesh
Ordering
It is important that the following information be given:
- Type of Material to be screened
- Number of screens required
- The overall dimensions of the screen mat - length & width
- The required mesh opening and wire diameter
- Is the screen flat or hooked (End Types)
- Hook type & Hook dimentions
- Is an overlap required
Note: costs can be reduced when ordering quantities of the same mesh.
When sending enquiries it would be helpful to send a drawing or sketch if possible.
Product List
(move mouse over to view name)
1 /
2 /
3 /
4 /
5 /
6 /
7 /
8
Woven Wire Screens
Clean Screens
Elongated Screens
Speed Screens
Finger Screens
Rubber Screen Mats
Perforated Plate
Cushion Rubber Cappings
|
